USER and TECHNICAL MANUAL KANMED Warming Cabinet GE-2-1370
Page 6 of 16
5
UNPACKING AND PACKING LIST
The cabinet is when shipped from KANMED carefully packed. Check for damages and report
them
immediately
to your supplier. Damages reported after the cabinet has been brought
into use are not accepted.
See the enclosed unpacking instructions which are attached to the cabinet and marked
"Unpacking Instructions."
PACKING LIST
Description
Part
no
Quantity
Warming Cabinet 175cm
GE-1380
1
Warming Cabinet 90cm
GE-1380-90
Warming Cabinet 175cm on wheelbase GE-1380-W
Warming Cabinet 90cm on wheelbase GE-1380-90-W
Manual
GE-1002-07X
1
6 INSTALLATION
Adjust the feet so that the cabinet is levelled.
Connect the cabinet to a grounded power outlet.
NOTE: Always secure the cabinets to a wall by using the built in top brackets to avoid
the risk of tipping forward at unfortunate circumstances.
7
USING THE CABINET
Open the door and switch on the Cabinet with the green power switch at the upper right side.
Check the set temperature and adjust if necessary according to 7.2
7.1 GENERAL
ADVICE
The Cabinet is designed for continuous use and shall be left switched on in order to ensure
that the contents are always warm.
If 2 gel pads are placed on top of each other the warm up time is increased considerably. If
often more than 10 gel pads are to be warmed at the same time we recommend that you
order extra shelves. Avoid folding gels.
Max load on a shelf is 8kg in basket 20kg.
NOTE: Do not place blankets or other bulky stuff at the top shelf since it may block the
air intake and cause overheating in the heating element due to reduced air flow.
Ensure that there is at least 5-cm free space.
