USER and TECHNICAL MANUAL KANMED Warming Cabinet GE-2-1370
Page 7 of 16
°F
°C
out
7.2 TEMPERATURE ADJUSTMENT AND INDICATION
The display shows the actual working temperature in the cabinet as long as the ON/OFF
switch is on and the door is closed.
The set temperature is indicated when the set button is pressed.
Every time the warming is switched on (ON/OFF or closing door), the set value is
automatically set to the set value that was valid at the previous switch off of the warming.
The working temperature can be selected in steps of 1
o
C within the range of 35 to 42
o
C.
Older version of regulator type ( 700-0464)
UP
DOWN
SET
Press set button to show the set (selected) temperature.
The set value is shown and the out lamp blinks as long as the set button is
pressed.
While the set button is pressed, the set value can be altered by pressing the UP
/ DOWN button.
UP
Press for temperature rise
DOWN
Press for temperature decrease.
OUT
Flashes as long as the set button is pressed.
Lights permanently while heating takes place (relay is closed)
Newer version of regulator (700-0659)
SET
Press set button to show the set (selected) temperature.
The set value is shown and the OUT lamp blinks for 2 sec. The set value can
be altered by pressing the UP / DOWN button.
UP
Press UP within 2 sec. for temperature rise until wished value is shown in the
display.
Down
Press DOWN within 2sec. for temperature decrease until wished value is
shown in the display.
set
