NetCOR™ Network Storage System
PART TWO: Configuring Your NetCOR
™
NAS
A) Choose a MAC system on the same
nework as the NetCOR system.
B) Open the Utilities folder:
Macintosh HD > Applications > Utilities
C) Launch the “Terminal” utility.
STEP 1: Launching the Macintosh Utility
STEP 2: Acquiring the NetCOR IP Address
STEP 3: Launching the NetCOR Interface
QUICK START GUIDE
A) Within the Terminal utility, type the following:
nmblookup NetCOR
B) Locate the NetCOR IP address line:
XXX . XXX . X . XX
NETCOR <00>
C) Make a Note of the IP address (ABOVE IN BLUE)
A) Launch Safari or Firefox web browser.
B) Enter NetCOR IP address in the address bar:
XXX . XXX . X . XX
C) Click “GO”
D) The NetCOR Log On screen should appear.
INSTALLATION STEPS FOR:
APPLE MACINTOSH
OS X - 10.x