NanoParticle Nebulizer: Operation
Liquid NanoParticle Sizer User Guide
7
Version 1.0.1
How to Install the Liquid NanoParticle Sizer Model 9310
The Liquid NanoParticle Sizer can be operated directly from the
Programmable Logic Controller (PLC) screens or the Kanolysis Model S330
software, which is a designated software platform for Kanomax instruments.
Installation Overview
Following is an overview of the steps required to get your Liquid
NanoParticle Sizer up and running. Please read the detailed instructions
(beginning below) for each step before you set up the instrument.
▪
Unpacking the NanoParticle Nebulizer Model 9110.
▪
Unpacking the Annular Flow Ion Mobility Classifier Model 3660.
▪
Unpacking the Fast Condensation Particle Counter Model 3650.
▪
Installing the NanoParticle Nebulizer Model 9110.
▪
Installing the Annular Flow Ion Mobility Classifer Model 3660.
▪
Installing the Fast Condensation Particle Counter Model 3650.
▪
Installing the Kanolysis Model S330.
▪
Installing the local network connections.
Unpacking the NanoParticle Nebulizer
To unpack the NanoParticle Nebulizer, follow these instructions:
1.
Carefully remove the nebulizer from its shipping container. Save the
original packing materials for use when shipping the nebulizer back to
Kanomax FMT, Inc. for service, or for moving the nebulizer to a different
location.
Warning.
If the NanoParticle Nebulizer is returned to Kanomax FMT, Inc.
in anything other than the original shipping container, you will be
charged for any damage that occurs during shipping. If you do not have
the original shipping container, contact Kanomax FMT Inc. at 651-762-
7762. (Customers in Asia please call +81 6-6877-0183.)
2.
Place the nebulizer on a level surface.
3.
Make sure there is an unrestricted air flow around the device. Kanomax
FMT, Inc. recommends at least a 2-inch air gap on both sides and the top
of the instrument.
4.
Allow the nebulizer to reach ambient temperature, if necessary.
5.
Make sure all the items listed in Table 1, were included in the
NanoParticle Nebulizer shipment. If any of the items are missing, or
damaged, please call Kanomax FMT, Inc. at 651-762-7762. (Customers in
Asia please call +81 6-6877-0183.)
Table 1: NanoParticle Nebulizer Model 9110 Packing List
