【
8
】
PRESSER FOOT
8-1 Presser foot pressure
The presser foot pressure should be as light as
possible, yet be sufficient to feed the fabric and
produce uniform stitches.
To increase the presser foot pressure, turn the
adjusting knob clockwise.
8-2 Position of the presser foot & foot lift
Fit the presser foot onto the presser bar so that the
needle can drop correctly to the center of the presser
foot needle drop hole.
■
Position of the presser foot
Loosen screw A.
Adjust by moving the presser foot left or right while
checking to make sure the needle drops correctly to
the center of the presser foot needle drop hole.
■
The lift in presser foot is 8mm from surface of needle
plate. Set stopper B at the required position.
Fasten the presser foot lift lever with nut C so that
the lever cannot be lowered.
12
B
B
L
L
X
X
s
s
e
e
r
r
i
i
e
e
s
s
