3
＜
Note
＞
Be careful about the remaining compressed air.
Even if stopping the air source at compressor, it is
possible to remain compressed air in tube.
Release the remaining compressed air by regulator.
【
3
】
AIR PIPING & WIRING ( AIR TYPE )
Connect the air tube and the electric cords with referring to the following picture. (also
refer to the parts list.) After connecting, fix the air tube and the electric cords with
bands onto the proper place under the table.
【
4
】
AIR PRESSURE
Set the air pressure at 4~5 kg/cm2 by regulator.
Do not increase the air pressure over 5 kg/cm2,
which may cause trouble.
