background image

DN1870-0905

4

ETSI EN300 330-2

: Electromagnetic Compatibility and Radio 

Spectrum Matters (ERM); Short Range Devices (SRD); Radio 
Equipment in the Frequency Range 9 kHz to 25 MHz and Inductive 
Loop Systems in the Frequency Range 9 kHz to 30 MHz; Part 2: 
Harmonized EN under Article 3.2 of the R&TTE Directive.

ETSI EN301 489-1

: Electromagnetic compatibility and Radio 

spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) 
standard for radio equipment and services; Part 1: Common technical 
requirements.

ETSI EN301 489-3

: Electromagnetic Compatibility and Radio 

Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) 
Standard for Radio Equipment and Services; Part 3: Specific 
Conditions for Short-Range Devices (SRD) Operating on Frequencies 
between 9 KHz and 40 GHz.

RoHS (Restriction on Hazardous Substances)

This standard restricts the use of the following substances: Lead, cadmium, 
mercury, chromium IV, polybrominated biphenyl (PBB), and polybrominated 
diphenyl ether (PBDE) in electrical and electronic equipment by no later than 
July 1, 2006.

WEEE (Waste Electrical and Electronic 

Equipment)

This regulation is used for Waste Electrical and Electronic Equipment, and 
addresses the disposal and the environmental handling of these products.

Summary of Contents for P345KPMTR

















Reviews: