BACKSIDE
CABLE OUTLET
VENTILATION
HOLES
BACK COVER
SECURING HOOK
INDIVIDUAL
POWER SWITCHES
USB
CHARGER
Smart Phone / Tablet Stand
MAIN POWER
SWITCH
Back Cover
How to use
Front Side
2. Place the CM1100 face down
in a vertical position. Firmly
plug in power cords of devices
you’d like to connect.
1. Remove the back cover.
3. Organize cords by placing
excess cable into the cabinet.
Be sure to leave enough slack
to reach your devices.
4. Align the cables into the cable
outlet holes, and close the
cover from the bottom.
8. Plug CM1100 into AC
power for use.
7. Attach the sticker to the
corresponding power button
of the connected device.
6. Select device ID labels for each
connected device.
5. After lifting slightly up the
detachment groove the
back cover, close completely
by pushing the upper part
of the back cover.
Back Side
SIDE CABLE
OUTLET
POWER
CORD
OUTLETS FOR
DEVICES
CIRCUIT
BREAKER
