DIGITAL COMBO RECEIVER
3. C/KU Switch : You can select C/KU band by selection of switch type.
4. Position (MOTOR (DiSEqC 1,2))
: After selecting a satellite, please select position number.
To change value, press
OK
button.
The position list will be displayed.
5. Degree (USALS) : Press the
NUMERIC
buttons and enter te degree.
6. LNB Freq.
: Select the proper LNB frequency referring to your LNB
using
OK
and
▲
or
▼
buttons.
7. C-LNB Freq.
: When selecting the C/KU Switch is selected as "
None
",
the C-LNB Freq will be dimmed automatically.
Press
OK
button, and then the C-LNB Freq.
list will be displayed. You can also input the freq.
you want. After inputting freq. using
NUMERIC
buttons,
press
OK
button.
8. LNB Power : Select the LNB Power On or OFF.
9. 22KHz
: Depending on the user's antenna switch box or LNB.
You can supply either 22KHz by setting "
ON
" or not by
setting "
OFF
".
When selecting the U-LNB 1 and U-LNB 2,
the 22KHz will be dimmed. (MOTOR (DiSEqC 1,2))
10. 0V/12V
: Depending on the user's antenna switch box.
You can choose either 0V/12V.
11. Tone Burst
: Depending on the user's antenna switch box.
("
off
", "
SAT A
" or "
SAT B
")
12. Press the
BLUE
button to set Drive(Fine Drive or Normal Drive) to run
the motor. (MOTOR (DiSEqC 1,2))
- Fine Drive/Normal Drive : To move the motor, press
◄
or
►
button.
- Go to zero : To move the zero position, press
OK
button.
- Store to location : To store the current position, press
OK
button.
- East Limit : To set the east limit by current position, press
OK
button.
- West Limit : To set the west limit by current position, press
OK
button.
- Clear Limit : To clear the stored limit value, press
OK
button.
13. DiSEqC
: You can select and use appropriate port for your
DiSEqC switch box.
Press
OK
button to select DiSEqC List.
(None, DiSEqC A, DiSEqC B, DiSEqC C, DiSEqC D)
Menu Guide
Channel Search
