Managing the spam filtration server
57
FreeBSD for the
facility decreases the level of details even if the
Verbose level
parameter has been assigned the
more debug
value.
The
more debug
level of details causes additional load on the server
and may decrease its performance. Please use that level only for
debugging of application operation.
After modification of common parameters for the filtration server, click the
Apply
button and restart the filtration server using the following command:
# /etc/init.d/kas3 restart
in Linux distributions;
# /usr/local/etc/rc.d/kas3.sh restart
in FreeBSD.
4.5.2. Parameters of the filtration master
process
The
Settings
→
Anti-Spam Engine
→
Process Server
page contains the
following settings for the filtration master process (see Fig. 19):
•
Max. number of filtration processes
– maximum number of filtering
processes running simultaneously. Default value:
10
.
•
Number of filtration processes at server start-up
– the number of
filtration processes initiated when the filtering process starts. By default,
the parameter is set to
0
. It means that the processes of the filtration
module will be initiated only when messages arrive.
•
Number of spare filtration processes
– maximum number of running
filtration processes expecting a request for analysis. If the number of
processes exceeds the specified limit, the application terminates unused
processes. Default value:
0
.
After modification of common parameters for the master process, click the
Apply
button and restart the filtration server using the following command:
# /etc/init.d/kas3 restart
in Linux distributions;
# /usr/local/etc/rc.d/kas3.sh restart
in FreeBSD.
