W E B T U N E R
137
137
137
137
10.8.2. Remote configuration of the
Scanner program
WebTuner allows you to edit the profiles of the Scanner program.
Scanner parameters are similar to those described for the daemon process
(see subchapter 10.7.2). The difference is the
report
page (see Figure 9),
where you cannot define the
User report
setting for your Scanner, and the
options
page (see Figure 8), where you will find the following extra
options:
Scan … files in parallel
– check this box to simultaneously scan
the objects defined in the text field that follows the word
Scan
.
Endlessly scan
– check this box to implement loop-scanning for
viruses.
Scan delay
– enter the interval between two loops (in seconds). This
parameter is used only if you checked
Endlessly scan
check
box.
#"
If the
Scan delay
value is equal to
0
, there will be no interval between
the loops!
10.8.3. Launching Scanner from a
Remote Location
WebTuner allows you to remotely launch the Scanner program.
$"
To start the Scanner program,
click the
run
hyperlink in the WebTuner main window with the Scanner
item selected in the list (see Figure 29). The Scanner start parameters
window (see Figure 30) with the following items will appear on your
screen:
•
Start parameters for the anti-virus scanner.
•
Buttons:
•
run
– launches the scanner.
