background image

K E E P E R  

 

Figure 2. The notification as it looks in the recipient mailbox 

• 

notification of an infected message with the message attached to 
it (see Figure 3 and Figure 4); 

• 

notification of an infected message and the message disinfected 
(if possible) and attached to it (see Figure 5 and Figure 6). 

 

To send only the notification, 

check the 

 

Add report

 check box for the 

Infected

 object type on the 

recipient

 page and select 

Remove

 from the corresponding 

Object 

action 

drop down list. The program will send the notification to the re-

cipient without the infected object attached to it. 

 

To send notification of an infected message and the message 

attached to it, 

check the 

 

Add report

 check box for the 

Infected

 object type on the 

recipient

 page and select 

Unchanged

 from the corresponding 

Ob-

ject action 

drop down list. The program will send the notification to the 

recipient with the infected object attached to it. 

89 

Summary of Contents for ANTI-VIRUS - FOR FREEBSD-OPENBSD-BSDI MAIL...








































































































































































































































































































Reviews: