W E B T U N E R
•
Enter the maximum size (in bytes) for the mail message
to be processed in the
Max mail size (Kb)
text field. If
the defined size is exceeded the message will not be
accepted for processing.
•
Enter the maximum number of intersystem transfers for
a message to be processed in the
Max hops
text field.
If the defined value is exceeded the message will not be
accepted for processing. For example,
Max hopes=12
•
Enter the maximum number of recipients for a single
message in the
Max recipients
text field.
The above settings are used by the program to protect you from
unwanted e-mail messages and DoS attacks!
•
Enter the maximum period (in seconds) for the program
to transmit an instruction in the
Out timeout
text field.
•
Enter the maximum period (in seconds) for the program
to receive an instruction in the
Input timeout
text field.
•
Enter the addresses (address masks) not to be notified
in the
Not send notify to
text field.
Since the Keeper program is the sender of the notifications, make
sure to add the address defined in the main page Keeper e-mail text
field to the above list of addresses not to be notified (see
subchapter 10.10.2).
2. In
the
Output protocol timeout
frame:
•
Enter the maximum period (in seconds) for the program
to try connecting via SMTP in the
Initial timeout
text
field.
•
Enter the maximum period (in seconds) for the program
to transmit an instruction in the
Command timeout
text
field.
•
Define the maximum waiting period for the program
after the appropriate instructions are transmitted:
°
HELO/EHLO/LHLO timeout
– after the
HELO/EHLO/LHLO
instruction is transmitted.
182
