EN
HOW TO PUT ON THE
HARNESS
1. Take the harness
by the back-attaching
buckle
2. Put on the shoulder
straps one after one,
take care do not
twist them
3. Connect front plastic
clip and adjust the
tension the chest strap
4. Pull one and then
other thigh straps
through crotch, take
care do not twist them
CONNECTING OF THE
STEEL BUCKLES OF
THE THIGH STRAPS
5.Regulation of the
thigh straps
6-7-8. Regulation of the
shoulder straps
9. Shortening
10. Lengthening
11. Shortening
12. Lengthening
HARNESS IS PUT ON CORRECTLY IF:
•All straps are correctly adjusted (neither too loose nor too tight).
•back attaching buckle is correctly positioned at the level of the shoulder blades.
•front chest strap is correctly positioned at the middle of the chest.
•the ends of all the straps must be kept by plastic loops.
ATTACHING FALL ARREST SYSTEM
the fall arrest system must be connected only to the attaching elements of the harness marked by capital
letter A. The fall arrest system must be connected only to:
-straight to the back-attaching buckle. or
-to both front attaching loops of the harness. It is strictly forbidden to attach a fall arrest system to
a single loop.
The back-attaching buckle is marked by a capital letter A - marked on the crossing plate with arrows
indicating back attaching buckle (1).
Front attaching loops are marked by a capital letter A/2 placed on the label inside of each loop (2).
1
2
3
4
5
6
7
8
9
10
11
12
1
2
2
2
