Kapro PROLASER 896G, User Manual

10

•  Store in a clean, dry place, between -4°F - 140°F (-20° C     

  +60° C)

•  Before moving or transporting the unit, ensure that it is  

  turned off and the pendulum is locked.

•  If the laser level is exposed to water, dry it before returning 

  it to the carrying case to prevent corrosion damage.

•  To maintain the accuracy of your project, check the accuracy

  of your laser level according to the field calibration tests procedures.

•  Change the batteries when the laser beams begin to dim.

•  Wipe the aperture lens and the body of the laser level with a   

  clean soft lint-free cloth. Do not use solvents.

•  Do not store in dusty places

•  If the laser unit is exposed to water, dry it with a dry cloth. Do  

  not return the laser to the carrying case until completely dry, 

  to prevent corrosion damage.

• Do not attempt to dry the laser unit with fire or with an electric  

 dryer.

• Do not drop the laser unit, avoid rough treatment and vibrations.

• Remove batteries from the laser unit when unit is idle for a    

  lengthy period of time and store in carrying case.

• Ensure that the laser unit is turned off before removing batteries.

Repairs

•  See the Warranty section at the end of this manual. 

•  Do not take the Prolaser

®

 896G 5-DOTS GREEN Laser  

Pointer apart or permit any unqualified person to take the  

laser unit apart. Unauthorized servicing may cause bodily  

injury, irreparably damage the laser unit and invalidate  

the warranty. 

MAINTENANCE