- 6 -
OSB650 Outdoor Series Speakers
Operation
1. Set the VOLUME control dial to MIN (turn to the left).
2. Turn on speakers with the POWER switch. The LED marked POWER will
light up. The LED marked BLUETOOTH will light up for a few seconds
then turn off.
3. Use the VOLUME control to adjust the sound to the desired level. If
sound distortion can be heard, decrease the volume until the distortion
can not longer be heard.
4. Use the TREBLE and BASS controls to adjust for the desired sound.
Bluetooth
®
Setup
The model 570-OSB650 allows you to stream music from a Bluetooth
®
enabled device. This would include any smart phone, tablet and MP3
player. This allows you to enjoy your favourite music indoors or outdoors
without wires.
BLUETOOTH
®
PAIRING INSTRUCTIONS
1. Turn the power on your 570 OSB650 speakers A voice will broadcast
the power is on
2. Scan for new device on your Bluetooth
®
enabled device
3. Select 570-OSB650
4. The system will announce that your device was paired
5. Begin streaming music to your speakers
Once a Bluetooth connection is made, the speakers will automatically
change the analogue “LINE IN” input to be off.
Note: The Bluetooth signal source must support A2DP profile standard.
(Advanced Audio Distribution Profile).
