14 of 33
KP2000 User Manual Version 1.0-EN
Scan Reading Mode
It is possible conconfigure the scanner for different scanning mode
Start Configuration((+SETF))
TriggerOn((+E1B)) Default
In this configuration the scan start when the trigger button is pressed.
At a good read, or after a time out, the Scanner stop
TriggerOn/Off((+E1A)
In this configuration the scanner start when the trigger button is
pressed and stay on until the trigger is released. At a good read the
scanner stop
Continuos/Trigger OFF((+E1C))
In this configuration the scan start reading in continuos mode when the
trigger button is pressed. The scanner stop at the second pression of the
Trigger.
In this configuration is not necessary press the trigger to read a
code.
Contin./Time Out Off((+E1F))
In this configurationthe scanner star reading in continuos mode when
the trigger button is pressed. The scanner stop after for a time ouf after
the last good read.
In this configuration is not necessary press the
trigger to read a code.
Continuos((+E1H))
In this configurationthe scanner star reading in continuos mode at
power on, and stay always on.
In this configuration is not necessary
press the trigger to read a code.
End Configuration((+ENDF))
Buzzer Setup
The buzzer can be configured to emit the sound at power on and at good read
Start Configuration((+SETF))
Power Beep On((+EBA)) Default
Buzzer On or Off at power on of the
scanner
Power Beep Off((+EBB))
Good Read On((+ECA)) Default
Buzzer On or Off after a good read
Good Read Off((+ECB))
End Configuration((+ENDF))