17
7.2
MANUAL POWER ON
Hold the Power button on the lower right hand side of the
camera until the Kapture start up screen appears.
7.3
MANUAL POWER OFF
Press the Power button on the lower right hand side of the
car DVR. After powering down the device please wait for 10
seconds before turning the Car DVR back on.
7.4 RESET THE CAR DVR
If the Car DVR does not function normally, try restarting the
car DVR. To restart the car DVR, using a small pin press and
hold the Reset button on the bottom side of the camera.
8.0 INITIAL SETTINGS
Before using the Car DVR we recommend Formatting the
Inserted Micro SD Card and setting the correct Time and Date.
8.1
FORMATTING THE INSERTED MICRO SD CARD
Formatting the Micro SD card will delete all information on the
inserted Micro SD Card and prepare the card for use with the
Car DVR.
1. Press the Menu Button to enter the Settings/Setup Menu.
2. Use the Up and Down Keys to navigate the Settings Menu
and highlight the Format SD Card setting and press the
OK to select.
3. Press Up and Down Keys to select confirm.
4. Press the OK button to start formatting.
Quick Format (Default), you can switch quick formatting to
change to full formatting in the Setting Menu.
