KAPUCI BGX-X1-45PMAZ, Product Manual

【

First Way to Open-External Battery Pack

】

In the factory state,you can use factory password 

168

 or any fingerprint to 

open the safes.After enter the correct password,you must end with

#

to let the 

System know that your  password has been entered. 

Step 1

Insert 4-AA batteries into the external battery
pack in the correct direction(Because of 
transportation,the battery is not included
in the accessorise)

Step 2:

Press the left or right end of the emergency keyhole 
cover to expose the emergency keyhold.
(If the emergency keyhold cover is in the key box,this 
step can be omitted )

Step 3:

Plug the battery plug into the external battery 
pack hole.And touch the password keypad area
to wake up screen,then enter 168,end with #,
the door can be opend automatically.

Or you can put any finger in the fingerprint 
collection area about 1second,breathing light 
turns green,the door can be opend automatically.

Step 3:

Step 4:

Unplug the battery pack,replace the battery into the
battery compartment above the back cover of the 
box door.When putting the battery compartmen back

。

Pay attention to the direction,the direction of the arrow
on the battery box is as shown in the figure.

When the battery is dead,or external battery pack cannot be found,or the password is forgotten,or
the fingerprint is not recognized,etc.You can use the emergency key to open the safe.

Once again,the emergency key and the external battery pack are very important,do not put them 
int the safe box .

2