MICRO REMOTE
14
Gate Configuration Page
GATE CONFIGURATION
This page allows you to
change the name (SSID) of
the WiFi network you are
connecting
to.
Factory
settings will rename the Wi-Fi
to its original name.
If Broadcast SSID option is
selected, the Wi-Fi name
(SSID) is public and it will be
visible to any other Wi-Fi
devices. Otherwise, the Wi-Fi
name (SSID) is hidden and it
would
require
manual
connection to the network.
If Enable Multiple Connections
is
selected,
multiple
connections up to 4 devices
could be connected to the
GATE. However, only one of
the connected devices can use
the GATE. If Single connection
is enabled, only one device
can be connected to the
GATE.
NOTE: A reconnect to the new
Wi-Fi connection is needed
after each change. It is
advised to keep a note of the
WiFi name in case if Not
Broadcast SSID option is
selected. Forgetting the WiFi
name after selecting this
option will require the GATE
