background image

2、

Usage instruction

:

2、

Usage instruction

:

Please read the booklet carefully before using.

1、

Safety notice item:

1、

Safety notice item:

Power plug must be assembled with creepage protector and connected with the 

terra wire, and follows the rules to operate. Power socket must be install 
out of reach of water.
The massage bathtub must be assembled by the careerman.
When switch on the shower and linn faucet, please adjust the suitable water 

temperature firstly, to avoid scalding and destroy the products.

Level  the  ground  and  wall  corner,  connect  cool  &  hot  water  hose 
correctly, assemble power socket and reference the size's parameter
to prepare the drain outlet .

3、

Way of installation.

3、

Way of installation.

  

  
  

      

Switch on the linn faucet/shower switch valve, switch on the cool water adjusting valve 

    firstly, then switch on the hot water adjusting valve, adjust the suitable water temperature 

    and water massage bathtub(Forbid to water the temperature higher 80

 hot water 

    directly, or it will destroy the product), await the water line reach 2CM above jets, then 

    press the air switch to switch on the water pump ( forbid to make the water pump running

    for a long timewithout water, or the water pump will destroy because of too high 

    temperature), left-right surf adjuster can adjust the size of current; turn the jets to adjust 

    single jet's current size to get the best massage impact.

Cardiopathy, hypertension and person who is unwell or after drinking, please

 no not use the massage bathtub to avoid risk happening.
Children should be accompanied by the adult while using the massage bathtub.

Finish using, eliminate the water in massage bathtub, then water 
suitable clear water, switch on the water pump to clean the 
massage bathtub pipeline.
If you will not use the massage bathtub for a long time, please 
cut off  the source and power of massage bathtub.

Place the massage bathtub in the confirmed position, adjust all 
the underprop  to make them meeting the ground and levelling.

Immit a spot of water in massage bathtub, turning the drainer 

handle, await finishing draining, there is not any water in the
massage bathtub more, or should repeat the step 2, until there is 

no water in bathtub.

Summary of Contents for CONCORDIA K-1080






Reviews: