6
This Machine is Manufactured for
Commercial use only.
This machine is designed and manufactured for
indoor use on hard floor surfaces. Karcher does not
recommend use of this machine in any environment
other than an indoor environment. This floor machine
is designed and manufactured for commercial floor use
only. This machine is designed to clean most modern
types of floors including composition tile, stone, marble,
terrazzo, and resilient floor covering, and some coated
wood floors.
Operator Responsibility
The operator is responsible for performing the
recommended daily maintenance and checkups of the
machine to keep it in good working condition. The
operator must inform the service mechanic or supervisor
when recommended maintenance procedures are
required as prescribed in the
“MAINTENANCE”
section
of this manual.
FOR SAFETY:
DO NOT
operate machine before
reading and understanding the operation manual.
Keep your machine regularly maintained by following the
maintenance information in this manual. Order parts and
supplies only from an Authorized Karcher Distributor.
Use the parts illustration section of your manual when
ordering parts.
During and after operation, perform the recommended
daily and hourly procedures outlined in the Maintenance
Chart.
Machine Preparation
Unpacking the Machine
When the machine is delivered, carefully inspect the
shipping carton and the machine for damage. Unpack
the machine with caution. If damage is evident, save the
shipping carton so that it can be inspected. Contact the
Karcher Customer Service Department.
Transporting the Machine
To transport the machine, follow this procedure:
1. Raise and lock the handle in the upright position. To
lock the handle, push down on the handle release
lever (See Figure 1).
2. Unplug the machine from wall outlet and wrap cord
around the handle and cork hook.
3. To pick up the machine, using two people, lift and
place in cargo area (See Figure 2).
WARNING! The machine is heavy, 90 lbs (41 kg)
without the cord. To avoid injury or damage to
the machine use a firm grip and proper lifting
technique. Always use two people when lifting this
machine.
Person #1
Person #2
Figure 2
Figure 1