Basic Settings and Service Procedures
BR/BD 75/140 R, BR/BD 90/140 R
Page 36 / 71
New Unit Information 03.2004
Test mode
The test mode is terminated by switching off the
unit. If the unit is switched back on using the key
switch, „select traction dir.“ appears on the dis-
play, if the lifting motors were not moved to their
end position during test mode. The basic setting
is reached again by pressing a direction of travel
push-button.
ORIGINAL
Press "forward drive" (13) push-button.
Seat contact switch must be closed by
loading (sitting on) the seat.
Indicator light (14 green) lights up.
Magnetic brake is released.
Indicator light (26 red) goes off.
Unit moves forwards if the pedal is pressed.
Press "reverse drive" (17) push-button.
Seat contact switch must be closed by
loading (sitting on) the seat.
Indicator light (15 green) lights up.
Magnetic brake releases.
Indicator light (26 red) goes off.
Unit moves reverse if the pedal is pressed.
Pulsating signal sounds from the horn.
Press "horn" (16) push-button.
Horn on.
