– 7
Note
: Please read and observe the safety
instructions prior to use!
Turn on the high-pressure cleaner.
Illustration
Adjust the height of the cleaning head:
Hold the cleaning head by the handle
recess and set it to the desired height
by pulling and pushing.
Illustration
Slide the underbody cleaner under the
body of the vehicle.
Unlock the lever on the hand spray gun
(see high pressure cleaner operating in-
structions).
Press the lever on the hand spray gun
and begin cleaning (see high pressure
cleaner operating instructions).
Note
: The underbody cleaner with its artic-
ulating guide rollers can be moved effort-
lessly under the vehicle. If it gets stuck,
please do not use excessive force.
You can apply care products after the un-
derbody wash with the care product nozzle
to preserve the vehicle.
Please observe the instructions on the care
product bottle.
Illustration
Use the care product nozzle instead of
the cleaning head.
Fill 0.2 litres of care product into the
care product container.
Completely use up the container con-
tents for the underbody care; do not
pour the care product back into the bot-
tle.
For procedure see "Underbody clean-
ing".
After concluding the cleaning process,
clean the care product nozzle, the clean-
ing head and the underbody cleaner:
Remove the hand spray gun from the
spray lance.
Illustration
Press the lever on the hand spray gun
and clean the underbody cleaner with a
gentle water jet.
After cleaning, switch off the high pres-
sure cleaner.
Unscrew the empty care product con-
tainer from the care product nozzle.
Clean the care product nozzle and the
care product container under running
water until all care product residue has
been remvoed.
For space-saving - it is possible to store the
underbody cleaner hanging up.
Clip both spray lances into their hold-
ers.
Illustration
Hook the underbody cleaner onto the
wall or into a KÄRCHER organiser
(special accessory, order no. 2.641-
630.0).
Operation
Underbody claening
Underbody care
Finish operation
Storage
10
EN
