4
5.906-510.0 Rev. 00 (12/10)
Good service work requires extensive and practice-
oriented training as well as well-structured training
materials.
Hence we offer regular basic and advanced training
programmes covering the entire product range for all
service engineers.
In addition to this, we also prepare service manuals
for important appliances - these can be initially used
as instruction guides and later on as reference
guides.
Apart from this, we also regular information about
product enhancements and their servicing.
If you should require supplements, have corrections
or questions regarding this document, please ad-
dress these citing the following subject to:
international-service@de.kaercher.com
The responsible product specialist will take care of
your issue.
Copying and duplication of texts and diagrams as
well as third-party access to this information is per-
mitted only with the explicit permission of the compa-
ny:
Alfred Kärcher GmbH & Co. KG
P O Box 160
D - 71349 Winnenden
www.kaercher.com
Safety devices serve to protect the user and must not
be rendered inoperational or their functions by-
passed.
The appliance may only be operated if all covers are
closed.
To put all functions out of operation immediately.
Note
Indicates useful tips and important information about
the product.
First pull out the plug from the mains before carrying
out any tasks on the machine.
After completing the maintenace work, check all safe-
ty and protective devices for correct installation and
proper function.
The scrubbing vacuum cleaner is used for the wet
cleaning of level floors.
It can be easily adjusted to the cleaning task by set-
ting the water quantity.
A working width of 385 mm and a capacity of 12 l
each of the fresh and dirt water reservoirs enable an
effective cleaning even when the machine is used for
long duration.
The batteries can be charged using a charger con-
nected to a 230 V socket.
Once the brush head is turned on at the control panel,
the functions "Vacuum" and/or "Feed water" are pos-
sible.
–
Fresh water and wastewater reservoirs have dif-
ferent designs (wastewater reservoir can be re-
moved).
–
Mechanical swimmer closes the suction opening
in the cover if the wastewater foams excessively
or if the wastewater reservoir is full.
–
Brush head must be turned on and the operating
lever for the brush head must be activated for the
solenoid valve (see water function diagram) to
open.
–
The fresh water amount can be regulated with a
stopcock according to the contamination level.
1
Preface
Subject:
Case
110780
2
Safety instructions
2.1
Safety Devices
2.1.1 Emergency-stop button
2.2
Hazard levels
2.3
General notes on safety
3
Technical Features
3.1
Brush system
3.2
Water System
