Warranty
The warranty conditions issued by our rele-
vant sales company apply in all countries.
We shall remedy possible malfunctions on
your appliance within the warranty period
free of cost, provided that a material or
manufacturing defect is the cause. In a war-
ranty case, please contact your dealer (with
the purchase receipt) or the next author-
ised customer service site.
(See overleaf for the address)
Accessories
Technical data
Subject to technical modifications.
The suction turbine runs at
an increased speed
1. Drain the waste water.
2. Clean the float.
3. Check the fluff filter and clean if necessary.
4. Check the suction hose for clogging and clean if necessary.
5. Check the suction bar for clogging and remove any clogging if necessary
The brushes do not rotate
1. Check if the brushes are blocked by a foreign body and remove the foreign body if necessary.
The device vibrates during
cleaning
1. Use a softer brush.
Malfunction
Rectification
Description
BD 70/75
part no.
BD 80/100
part no.
Description
Disc brush, white (soft)
4.905-011.0 4.905-030.0 For cleaning lightly soiled or sensitive floors
Disc brush, natural colour (soft)
4.905-012.0 4.905-031.0 Made of natural fibres for cleaning and polishing
Disc brush, red (medium, standard) 4.905-010.0 4.905-000.0 For use in all common cleaning tasks
Disc brush, black (hard)
4.905-013.0 4.905-032.0 For heavy soiling and basic cleaning, only for non-sensitive surfaces
Pad drive board
4.762-590.0 4.762-447.0 For cleaning with pads, with quick-change coupling and centre-lock
Pad, white
6.371-331.0 For polishing floors
Pad, red (medium soft)
6.369-003.0 6.371-147.0 For cleaning all floors
Pad, green (medium hard)
6.369-002.0 6.371-148.0 For cleaning heavily soiled floors and for basic cleaning
Pad, black (hard)
6.369-001.0 6.371-169.0 For stubborn soiling and for basic cleaning
Pad, brown (SPP)
2.639-290.0 2.639-288.0 For protective film application on hard and elastic surfaces
Pad, melamine
6.371-021.0 6.371-336.0 For effective cleaning of micro-porous surfaces
Suction bar, 1030 mm, curved
4.777-108.0
Suction bar, 1160 mm, curved
4.777-102.0
Suction lip set, natural rubber
4.037-144.0 4.037-138.0
Suction lip set, PU (oil resistant)
4.037-145.0 4.037-140.0
Suction lip set, Linatex
4.181-011.0 4.181-006.0
BD
70/75
W
Clas-
sic
Bp
BD
80/
100 W
Clas-
sic
Bp
Device performance data
Nominal voltage
V
24
24
Battery capacity
Ah (5
h)
115 /
170 /
180
170 /
180 /
240 /
285
Mean power input W
1270 1320
Driving motor pow-
er
W
250
300
Suction turbine
power
W
500
500
Brush drive power W
2 x
500
2 x
500
Theoretical surface
performance
m2/h
3500 4000
Fresh water tank
capacity
l
75
100
Waste water tank
capacity
l
75
100
Water temperature
max.
°C
50
50
Water pressure
max.
bar
0,06
0,06
Aisle turning width mm
1550 1650
Max. working area
slope
%
2
2
Vacuuming
Suction perfor-
mance, air quantity
l/s
24
24
Suction perfor-
mance, vacuum
kPa
(mbar)
16
(160)
16
(160)
Cleaning brushes
Working width
mm
700
800
Brush diameter
mm
356
410
Brush speed
1/min 140
140
Brush contact pres-
sure
N
300 /
500
400 /
680
Dimensions and weights
Approved total
weight
kg
325
435
Net weight (trans-
port weight)
kg
251
325
BD
70/75
W
Clas-
sic
Bp
BD
80/
100 W
Clas-
sic
Bp
Battery compart-
ment dimensions
mm
575 x
380
622 x
384
Determined values in acc. with EN
60335-2-72
Overall vibration
value
m/s2
<2,5
<2.5
Uncertainty K
dB(A) 0,2
0,2
Sound pressure
level LpA
dB(A) 65
65
Uncertainty KpA
dB(A) 2
2
Sound power level
LWA + K uncer-
taintyWA
dB(A) 81
81
BD
70/75
W
Clas-
sic
Bp
BD
80/
100 W
Clas-
sic
Bp
Summary of Contents for BD 70 W Classic Bp
Page 2: ......
