Kärcher BDS 43/Orbital C Spray, Instructions Manual

English

5

Contents

IMPORTANT SAFETY 

INSTRUCTIONS

SAFETY INSTRUCTIONS

CAUTION
READ ALL INSTRUCTIONS BE-
FORE USING THIS MACHINE

●

Inform your dealer immediately if 
there is any shipping damage.

●

Completely remove the accessories 
from the box.

●

Only operate the appliance from a 
grounded outlet. Refer to the Tech-
nical data for the necessary main 
fuse.

●

Connect to a properly grounded out-
let only. See Grounding Instructions.

When using an electrical machine, ba-
sic precautions should always be fol-
lowed, including the following: This 
appliance is intended for commercial 
use.
1 DISCONNECT APPLIANCE FROM 

POWER CIRCUIT before removing 
the cover, performing maintenance 
work, and when not in use.

2 DO NOT LEAVE the machine unat-

tended when plugged in.

3 ALWAYS CHECK THE POWER 

SUPPLY CORD for damage or signs 
of any aging before each use.

4 DO NOT PULL OR CARRY APPLI-

ANCE BY CORD. Do not use cord 
as a handle. Keep cord away from 
heated surfaces or fire. Do not close 
door on cord or pull cord around 
sharp edges.

5 KEEP CORD AWAY FROM HEAT 

AND OIL. Do not leave cord lying 
around after job is complete. It can 
become a tripping hazard.

6 DO NOT RUN MACHINE OVER 

CORD.

7 TURN SWITCH TO OFF before un-

plugging power supply cord.

8 DO NOT UNPLUG BY PULLING 

CORD. To unplug, grasp plug, not 
cord.

9 DO NOT GRASP PLUG WITH WET 

HANDS.

10A DAMAGED CORD OR PLUG 

should only be replaced by an au-
thorized service center representa-
tive. DO NOT ATTEMPT TO 
REPAIR POWER CORD.

11TO AVOID SHOCK, do not expose 

to rain. Store indoors.

12USE ONLY AS RECOMMENDED 

BY THIS MANUAL. Use only with 
recommended attachments.

13KEEP HAIR, CLOTHING, LOOSE 

JEWELRY, FINGERS and all parts 
of the body away from openings and 
moving parts.

14CONNECT THE APPLIANCE WITH 

PROPERLY GROUNDED OUTLET 
ONLY. See grounding instructions.

15DO NOT ALLOW THE APPLIANCE 

TO BE USED AS A TOY. Keep chil-
dren away.

 IMPORTANT SAFETY INSTRUC-

TIONS ................................................

5

 General notes ....................................

7

 Intended use ......................................

7

 Safety instructions..............................

8

 Environmental protection ...................

8

 Accessories and spare parts..............

8

 Scope of delivery ...............................

9

 Control elements................................

9

 Installation..........................................

9

 Initial startup....................................... 10
 Operation ........................................... 11
 Shutting down .................................... 11
 Transport............................................ 12
 Storage .............................................. 12
 Care and service................................ 12
 Troubleshooting guide........................ 12
 Warranty............................................. 13
 Technical data .................................... 13