Kärcher BR 35/12 C BP, Original Instructions Manual

– 9



Danger

Risk of injury. Turn the appliance switch to 
"0" and pull the mains plug of the charger 
prior to performing any work on the appli-
ance.

몇

Warning

Risk of damage to the appliance on ac-
count of water leakage. Drain out dirty wa-
ter and the remaining free water before 
working at the machine.

In case of faults that cannot be remedied 
using the table below please contact the 
customer service. 

Faults

Fault

Remedy

Appliance cannot be started

Switch on the appliance switch, wait 3 seconds, check 
charge condition of the battery.

Insufficient water quantity

Check fresh water level, refill tank if necessary.
Switch on "Detergent" button.
Open the dosing device for the cleaning solution.
Clean the fresh water filter.

Insufficient vacuum perfor-
mance

Lower the vacuum bar.
Empty the dirt water reservoir.
Clean the seals between dirt water reservoir and cover 
and check for tightness, replace if required.
Clean the vacuum lips on the vacuum bar, turn or replace 
if required
Check if the suction hose and vacuum bar are chocked, 
clean if required
Check the suction hose for tightness; replace if required.

Insufficient cleaning result

Check/set the brush contact pressure.
Check the brush type and the detergent for their suitability.
Check the brushes for wear, replace if required.

Brush does not turn

Pull the safety switch towards the steering wheel.
Check if foreign matters are blocking the brush roller; re-
move foreign matter if required.
Switch off the switch for the brush drive, wait for a short 
period of time, switch the switch back on.

11

EN