– 15
Washed steps are not clean. Check detergent nozzles to see if they are blocked;
clean or replace if required.
Check the condition of the seal of the dirt water res-
ervoir for damages, replace if required.
Check the brush rollers and intake brushes for
wear, replace if required.
Check detergent. Check the concentration of the
detergent solution.
Check the intake brushes for wear, replace if re-
quired.
Check whether the waste water tank lid is com-
pletely closed.
Check whether the correct combs have been in-
stalled.
Indicator lamp "Brush motor
overload" is glowing.
Set appliance switch to "0", then turn it back to the
desired operating position. If the fault recurs often,
call customer service.
Remove belts or cords from brushes.
17
EN
Summary of Contents for BR 47 ESC
Page 1: ...BR 47 35 ESC 59657130 05 15 English 3 Français 20 Español 37 ...
Page 2: ...2 ...
Page 54: ......
Page 55: ......
