37
Mantenimiento
5. Para volver a instalar, siga los pasos a la inversa.
NOTA:
Debe alinear las mordazas del acoplador
cuando deslice hacia adentro el montaje del
alojamiento de accionamiento del cepillo.
Para reparar o reemplazar el motor
de vacío
1. Retire los cuatro (4) tornillos de la parte superior
del panel de control.
2. Vuelve hacia atrás el panel de control de la consola
para mostrar los cables del motor de aspiración.
3. Desconecte el conector eléctrico del motor de
aspiración.
4. Sustituya un tornillo para sujetar el panel de control
a la consola.
5. Abra la consola.
6. Retire las dos (2) tuercas del soporte del motor
de vacío, como se indica a continuación.
7. Retire los tres (3) tornillos que sujetan el montaje
del motor de aspiración en su sitio. Retire el montaje
del motor de vacío, como se indica a continuación.
8. Retire los tres (3) tornillos que sujetan el motor
de aspiración. Sustituya el motor.
9. Para volver a instalar, siga los pasos a la inversa.
NOTA:
Si el motor de aspiración no está montado
como se indica, es posible que la aspiración no
quede sellada correctamente y en consecuencia
se obtenga un rendimiento deficiente.
VACUUM MOTOR
BRACKET
SOPORTE DEL MOTOR
DE ASPIRACIÓN
VACUUM ASSEMBLY
MOUNTING SCREWS (3)
TORNILLOS (3) DE MONTAJE
DEL CONJUNTO DE LA
ASPIRADORA
1.18
VACUUM MOUNTING
SCREWS (3)
TORNILLOS DE
MONTAJE DE
ASPIRADORA
3
8
[9.5mm]
Motor de vacío Escobillas de carbón
Escobillas de carbón
Tapa
Si el conmutador del rotor no es concéntrico, o está
muy picado o estriado, el motor debe sustituirse o ser
enviado a un servicio técnico autorizado..
Importante:
Las escobillas se desgastan más deprisa cuando se
reduce su longitud, por aumento del calor El muelle
dentro del alojamiento de las escobillas puede dañar
el motor si éstas se desgastan por completo.
Compruebe la longitud de las escobillas de carbón
periódicamente Sustitúyalas cuando la longitud de
alguna de ellas sea menor de 95 mm (3/8").
8.644-676.0 Operator’s Manual - iVac 24 ATV
Summary of Contents for Chariot 2 iVACUUM 24 130 A/H
Page 14: ...14 Operations Drive Controls 1 2 3 4 5 6 7 8 9 10 8 644 676 0 Operator s Manual iVac 24 ATV ...
Page 46: ...46 Suggested Spare Parts 8 644 676 0 Operator s Manual iVac 24 ATV ...
Page 90: ...44 Sugerido De Piezas Sueltas 8 644 676 0 Operator s Manual iVac 24 ATV ...
Page 91: ...45 Notes 8 644 676 0 Operator s Manual iVac 24 ATV ...