English
FS 2000
26
Insert cap in pressure vessel
opening
Fit cap
Warning:
Sealing ring must make uniform
contact with pressure vessel
opening!
Flip over fastener and press down
as far as it will go
Insert pressure vessel in unit
Secure bracket
Connect air hose
Flushing pressure vessel
Warning:
Chemical reaction hazard!
Unit must be thoroughly cleaned of
all residue before switching from
acid to alkaline cleaning agents!
Pressure vessel will otherwise be
damaged by pitting.
−
Stopping machine
−
Dissipate pressure
−
Drain pressure vessel
Fill pressure vessel with water
Warning:
Water temperature
max. 50 °C
Volume
max. 20 l
−
Close pressure vessel
Close air supply valve
(position across direction of flow)
Turn control valve anti-clockwise
Insert power plug
Set ON/OFF switch to „I“
Actuate hand gun until fluid in
pressure vessel has been used up
CARE
−
Stopping machine
−
Dissipate pressure
−
Drain pressure vessel
−
Flushing pressure vessel
Only use a damp cloth for cleaning
the cleaner
Wipe over with clean, dry cloth
Do not use chemical cleaning
agents!
Rinse out pressure vessel with
water and leave standing open to
dry
Danger of poisoning!
∗
Never blow into clogged nozzles
or valves
∗
Take utmost care to avoid water
pollution
Clean fan jet nozzle by hand/with
tooth brush
