background image

4

English

IMPORTANT SAFETY INSTRUCTIONS

Read the operating instructions of the engine 

 

manufacturer before start-up and follow the 
safety instructions carefully.

        

WARNING

When using this product basic precautions should 
always be followed, including the 
following:

Read all the instructions before using the 

 

product.
To reduce the risk of injury, close supervision is 

 

necessary when a product is used near children.
Know how to stop the product and bleed pres-

 

sures quickly. Be thoroughly familiar with the 
controls.
Stay alert – watch what you are doing.

 

Do not operate the product when fatigued    

 

or under the influence of alcohol or drugs.
Keep operating area clear of all persons.

 

Do not overreach or stand on unstable support.

 

Keep good footing and balance at all times.

 

Wear safety goggles.

 

Follow the maintenance instructions specified in 

 

the manual.
To avoid risks, all repairs and replacement of 

 

spare parts may only be carried out by authorized 
customer service personnel.

        

WARNING

Risk of Injection or Injury – Do Not Direct Discharge 
Stream At Persons.

High pressure jets can be dangerous if 

 

misused. The jet must not be directed at 
persons, animals, electrical devices, or the 
unit itself.
Do not spray electrical connections, electri-

 

cal outlets or fixtures.

        WARNING

Risk Of Explosion – Do not spray flammable liquids.

Do not use acids, alkaline, solvents, or any 

 

flammable material in this product. These 
products can cause physical injuries to the 
operator and irreversible damage to the 
machine.

              

        

WARNING

Gun Kicks Back – Hold with both hands.

The Trigger Gun Safety Lock prevents the 

 

trigger from accidentally being engaged. 
This safety feature DOES NOT lock trigger 
in the ON position.

        

WARNING

The engine exhaust from this product contains chemi-
cals known to the State of California to cause cancer, 
birth defects or other reproductive harm. Operation 
of this equipment may create sparks that can start 
fires around dry vegetation. A spark arrestor may be 
required. The operator  should contact local fire agen-
cies for laws  or regulations relating to fire prevention 
requirements.

        

CAUTION

Risk of Asphyxiation – Use this product only in a
well ventilated area.

Operate and fuel machine in a well ven-

 

tilated area, free of devices featuring an 
open pilot or flame such as boilers, water 
heaters, etc.

        

CAUTION

Risk of Fire – Do not add fuel when the product 
is operating.

Do not operate if fuel has been spilled. 

 

Instead, move the machine to a different 
location and avoid creating sparks.
The machine has hot surfaces which can 

 

cause burns. Operate the unit in a safe 
environment and away from children.
Do not touch hot surfaces or allow acces-

 

sories to contact hot surfaces.
Do not allow the high pressure hose to 

 

come into contact with the muffler guard.
Do not leave the machine running unat-

 

tended.
Avoid tipping the machine on its side.

 

SAVE THESE  INSTRUCTIONS!

Summary of Contents for G 2600 PC
















Reviews: