Engine shipped without oil in
crankcase. Before starting engine, fill
with oil. Do not over-fill. Do not run the
engine with a high or low oil level as
this can cause engine damage. If you
have further questions regarding the
engine, please refer to the engine
manual included with the unit.
Check the engine oil level with the
engine stopped and in a level position.
1. Remove the filler cap/dipstick and
wipe it clean.
2. Insert and remove the dipstick without
screwing it into the filler neck. Check the
oil level shown on the dipstick.
3. If the oil level is low, fill to the
edge of the oil filler hole with the
recommended oil.
Always use SAE 10W-30 oil.
Oil crankcase capacity: 0.6L.
4. Reposition the oil gauge dipstick and
tighten it by turning clockwise.
5. Engine oil should be changed after the
first 5 hours, then every 50 hours. Failure
to change engine oil will void engine
warranty.
Preparation
Engine Oil Level
Page 10
Summary of Contents for G 3800
Page 1: ...G 3800 G3800 Petrol Pressure Washer 9 507 268 0...
Page 2: ...Page 2 Machine Part List...
Page 25: ......
Page 28: ......
