background image

English  

9

Release the lever on the trigger gun.

Illustration 

Lock the lever on the trigger gun.

During longer breaks (more than 5 min-
utes), also turn the appliance off using 
the "0/OFF" switch.

Insert the trigger gun in its holder.

Caution

Only separate the high-pressure hose from 
the trigger gun or the appliance while there 
is no pressure in the system.

After operation with detergent: Run the 
machine for approximately 1 minute for 
a clear rinse.

Release the lever on the trigger gun.

Turn off the appliance "0/OFF".

Turn off tap.

Press the lever on the trigger gun to re-
lease any remaining pressure in the 
system.

Illustration 

Lock the lever on the trigger gun.

Detach the appliance from the water 
supply.

Pull out the mains plug.

Caution

In order to prevent accidents or injuries, 
keep in mind the weight of the appliance 
during transport (see Specifications).

Lift appliance by the carrying handle 
and carry it.

Pull out the transport handle until it au-
dibly snaps into place.
Pull the appliance by its transport han-
dle.

Secure the appliance against shifting 
and tipping over.

Interrupting operation

Finish operation

Transport

When transporting by hand

When transporting in vehicles

Summary of Contents for K 2.325

















Reviews: