background image

10 

English

You can rectify minor faults yourself with 
the help of the following overview. 
If in doubt, please consult the authorized 
customer service.

Danger

Turn off the appliance and remove the 
mains plug prior to any care and mainte-
nance work.
Repair works may only be performed by the 
authorized customer service.

Pull on the lever of the trigger gun; the 
device will switch on.

Check whether the voltage indicated on 
the type plate corresponds to the volt-
age of the mains supply.

Check the mains connection cable for 
damages.

Check setting at the spray lance.

Appliance ventilation: Switch the appli-
ance on with the high-pressure hose 
detached and operate (max. 2 minutes) 
until the water exits the high-pressure 
connection without bubbles. Switch off 
appliance and reconnect high-pressure 
hose.

Check the water supply.

Pull out the sieve in the water connec-
tion using flat-nose pliers and clean un-
der running water.

Cause: Voltage reduction due to weak 
mains supply or when using an extension 
cable

.

When switching on, first pull the lever of 
the trigger gun and then switch the ap-
pliance switch to "I/ON".

Clean high-pressure nozzle: Remove 
dirt and debris from the nozzle bore, us-
ing a needle and rinse through with wa-
ter from the front.

Check water flow quantity.

Slight leakage from the appliance pump 
is normal. If the leakage increases con-
tact the authorized customer service.

Use spray lance with pressure regula-
tion (Vario Power).
Turn the spray lance to "Mix" position.

Check the settings at the dosage regu-
lator for detergent.

Check whether the Plug 'n' Clean deter-
gent bottle is placed into the detergent 
connection facing down.

Check the detergent suction hose for 
kinks.

Troubleshooting

Appliance is not running

Pressure does not build up in the 

appliance

Appliance does not start, motor 

hums

Strong pressure fluctuations

Appliance is leaking

No detergent infeed

Summary of Contents for K 3.550

















Reviews: