background image

3

IMPORTANT PRECAUTIONS – 

Read First!

Caution

• Follow the maintenance instructions

specified in the manual.

• This machine has been designed for use

with cleaning detergent supplied
or recommended by the manufacturer.
The use of other cleaning detergents may
affect the operation of the machine and
void the warranty.

GROUNDING INSTRUCTIONS

This product must be grounded. If it should
malfunction or breakdown, grounding provides
a path of least resistance for electric current to
reduce the risk of electric shock. This product
is equipped with a cord having an equipment-
grounding conductor and a grounding plug. The
plug must be plugged into an appropriate outlet
that is properly installed and grounded in
accordance with all local codes and ordinances.

DANGER

  –  Improper connection of the

equipment-grounding conductor can result in
a risk of electrocution. Check with a qualified
electrician or service personnel if you are in
doubt as to whether the outlet is properly
grounded. Do not modify the plug provided with
the product – If it will not fit the outlet, have a
proper outlet installed by a qualified electrician.
Do not use any type of adaptor with this product.

Extension Cords

Use a sufficient gauge:

Up to 25 ft = 12/3 AWG
25 to 50 ft = 10/3 AWG

Use only 3-wire extension cords that have 3-
prong grounding-type plugs and 3-pole cord
connectors that accept the plug from the
product. Use only extension cords that are
intended for outdoor use. These extension
cords are identified by a marking “Acceptable
for use with outdoor appliances; store indoors
while not in use.” Use only extension cords
having an electrical rating not less than the
rating of the product. Do not use damaged
extension cords. Examine extension cord before
using and replace if damaged. Do not abuse
extension cord and do not yank on any cord to
disconnect. Keep cord away from heat and
sharp edges. Always disconnect the extension
cord from the receptacle before disconnecting
the product from the extension cord.

       Safety Warnings

When using this product basic precautions
should always be followed:

• Read all the instructions before using the

product.

• High pressure jets can be dangerous if subject

to misuse. The jet must not be directed at
persons, animals, electrical devices, or the
machine itself.

• To reduce the risk of injury, do not operate the

machine near children.

• Learn how to stop the machine and release

pressure quickly. Be thoroughly familiar with
the controls.

• Stay alert — watch what you are doing.
• Wear safety goggles.
• Do not use acids, solvents, or any other

flammable material in this product. These
products can cause physical injuries to the
operator and irreversible damage to the
machine.

• Do not operate the product when fatigued or

under the influence of alcohol or drugs.

• Do not stand on unstable surfaces. Stand with

both feet balanced at all times.

• To reduce the risk of electrocution, keep all

connections dry and off the ground. Do not
touch plug with wet hands.

• The Trigger Gun Safety Lock PREVENTS the

trigger from accidentally being engaged. This
safety feature DOES NOT lock trigger in the
on position.

WARNING

• DO NOT USE WITH FLAMMABLE LIQUIDS

AND TOXIC CHEMICALS.

• INJECTION HAZARD: EQUIPMENT CAN

CAUSE SERIOUS INJURY IF THE SPRAY
PENETRATES THE SKIN. DO NOT POINT
THE GUN AT ANYONE OR ANY PART OF
THE BODY. IN CASE OF PENETRATION
SEEK MEDICAL AID IMMEDIATELY.

• THIS SYSTEM IS CAPABLE OF PRODUCING

1600 PSI. TO AVOID RUPTURE AND
INJURY, DO NOT OPERATE THIS PUMP
WITH COMPONENTS RATED LESS THAN
1600 PSI WORKING PRESSURE
(INCLUDING BUT NOT LIMITED TO SPRAY
GUNS, HOSE AND HOSE CONNECTIONS).

• BEFORE SERVICING, CLEANING OR RE-

MOVAL OF ANY PARTS, SHUT OFF POWER
AND RELIEVE PRESSURE.

• DO NOT SPRAY ELECTRICAL APPARATUS

AND WIRING.

• IF CONNECTION IS MADE TO A POTABLE

WATER SYSTEM, THE SYSTEM SHALL BE
PROTECTED AGAINST BACKFLOW.

Summary of Contents for K 5.86 M

























Reviews: