English
KM 100/40 W
13
Replacing the sealing strips
Front sealing strip
Loosen the fastening of the sealing
strip
Replace sealing strip
Don’t tighten the sealing strip yet
Adjust the ground clearance of the
sealing strip such that there is a
spacing of 10 15 mm toward the
back
Align the sealing strip
Tighten the fixing screws of the
sealing strip
Rear sealing strip
Remove the swept material
container
Unscrew the fastening of the
sealing strip
Replace sealing strip
Tighten the fixing screws of the
sealing strip
Side sealing strips
Loosen the fastening of the sealing
strip
Replace sealing strip
Don’t tighten the sealing strip yet
Slide a support under it with
1 2 mm thickness to adjust the
ground clearance
Align the sealing strip
Tighten the fastenings of the
sealing strip
Replacing the dust filter
♦
Wear a dust protection mask when
working on the filter system
♦
Observe the safety precautions for
handling fine dust
Lock the hand brake
Remove the swept material
container
Remove safety cotter pin of the
shaker rod
Pull out rod.
Loosen fastening screws.
Loosen fastening screws.
Remove sheet steel chassis
Replace the dust filter
Note:
Make sure that the vanes remain
undamaged when mounting the new
filter
ACCESSORIES
Sweeping strap
6.906-131
With standard bristling for inside- and
outside cleaning.
Sweeping strap soft
6.906-161
Bristling for inside.
Sweeping strap
anti-static
6.906-162
Bristling for plastic floors and inside.
Standard main brush
6.905-587
Wearproof and wetproof.
Universal bristles for indoor and
outdoor cleaning.
Main brush soft
6.905-870
With natural bristles specially for
sweeping fine dust on smooth indoor
floors. Not wetproof, not for abrasive
surfaces.
Main brush hard
6.905-868
For removing stubborn external dirt,
damp-proof.
Main brush anti-static 6.906-026
For cleaning carpeted surfaces.
Fluff filter add-on kit
for sweeping carpets
2.638-851
Prevents clogging of the flat pleated
filter.
Flat pleated filter
5.731-585
Replace flat fold filters at least once a
year.
Wetproof, washable. Filter efficiency
> 99,9 %, corresponds to category C
of ZH 1/487 of BIA.
