30
Störungshilfe
KMR 1250 D
Note:
For operating and maintenance instructions,
consult the Operator Manual for this engine.
Check engine oil level
–
Engine oil level must be between the MIN and
MAX markings on the dipstick.
Top up engine oil
–
The dipstick hole is used to add new oil to the
engine. For oil type and required volume, refer
to “Specifications”.
Change engine oil
–
Place a suitable catch tray beside the unit.
–
While holding oil drain hose in catch tray,
remove oil plug and allow engine oil to drain.
–
Securely replace oil drain plug.
Note:
Ensure environmentally safe disposal of
used engine oil.
–
Fill engine with new oil. For oil type and re-
quired volume, refer to “Specifications”.
Check air filter element
When filter element is dirty, replace the paper
filter element. To clean filter element, blow through
with compressed air from the inside out, or firmly
tap on hard surface to dislodge caked-on dust.
Do not brush off because this would press
dust particles into paper fibers.
Oil dipstick, diesel engine
Maintenance Procedures (diesel engine)
Draining engine oil, diesel engine
Air cleaner w/ paper element, diesel engine
