KMR 1250 B, LPG, D
56
Maintenance Procedures for B, LPG & D Models
Maintenance intervals
Maintenance procedures are performed at the
following intervals:
Daily by operator
–
Check oil level
–
Check tire pressure
–
Check brush roller for wear and snagged
strings, banding, etc.
–
Check air cleaner/filter for damage
Weekly by operator
–
Check sealing lips in sweeping system for
wear and proper adjustment
Every 100 hours
–
Check air cleaner/filter for damage
–
Change engine oil
–
Check brush roller and side brushes for wear,
and replace as required.
By service specialist
–
after 8 hours
–
every 100 hours
–
every 300 hours
–
every 500 hours
–
every 1000 hours
(Refer to table on opposite page.)
1-3 mm
1-5 mm
10-
20 mm
Wöchentlich
Weekly
Wartung
Maintenance
KMR 1250
Täglich
Daily
Alle
Every
100 h
max
min
6 bar
