English
User Instructions
KMR 1250 D
40
Maintenance
First engine oil change
!
Caution!
When an engine is new, it is subject to increased abrasion.
In order that the engine does not suffer any damage, we
recommend that you change the engine oil and the oil filter
after the first 8 operating hours.
Initial inspection after 8 operating hours
!
Caution!
In order to ensure that your sweeper functions safely and
reliably, it should undergo an initial inspection after approx. 8
operating hours. The inspection should be carried out by an
authorised service agent.
n
Check all Bowden cables and make adjustments where
necessary.
n
Change the engine oil.
n
Check that there are no leaks in the hydraulic system and
all components function correctly.
n
Check that the parking brake functions correctly.
n
Check the air pressure in the tyres (correct level: 6 bar).
Daily maintenance
n
Check the engine oil level.
n
Check the tyre pressure (correct level: 6 bar).
n
Inspect the brush roller and remove any string, rope, etc.,
that may be caught up in the brushes.
n
Check the dust filter. If it is very dirty, operate the shaker
to clean it off.
n
Empty the waste container.
Maintenance intervals
Keep to the service intervals set out in the maintenance
booklet so that your sweeper functions reliably and you
retain the full benefit of the warranty.
The maintenance booklet (Order-no. 5.950-536) can be
found in the tool compartment on the sweeper (under the
bonnet).
The necessary maintenance tasks should be carried out by
an authorised service agent.
