English
15
Safety devices
몇
CAUTION
Missing or modified safety devices
Safety devices are provided for your own protection.
Never modify or bypass safety devices.
Overload protection
The device is equipped with an overload protection sys-
tem. The device switches off automatically when an
overload is detected.
Anti-tipper
The device is equipped with a tilting aid that prevents
the unit from starting when the angle of inclination ex-
ceeds 45°.
Symbols on the device
Description of the device
The maximum amount of equipment is described in
these operating instructions. Depending on the model
used, there are differences in the scope of delivery (see
packaging).
For the illustrations, refer to the graphics page.
Illustration A
1
Battery pack release
2
Charge indicator
3
Type plate
4
Push Assist lever
5
ON/OFF lever
6
Slider speed control
7
Starter button
8
Motor control cable
9
Telescopic handle
10
Handle lock
11
Grass bag
12
Quick-release catch
13
Cutting height adjustment lever
14
Cutting height display
15
Fall protection
16
Mulch plug
17
*Side ejector
18
Safety key
19
*Battery Pack Battery Power+ 36V (2x)
20
*Quick Charger Battery Power+ 36V
* optional
Rechargeable battery pack
The device can be operated with two 36 V Kärcher Bat-
tery Power+ battery packs.
Initial startup
Adjusting the handle
1. Fold over the telescopic handle.
a Pull out both quick-release catches.
Illustration B
b Turn the quick-release catches.
The quick-release catches are unlocked.
c Fold over the telescopic handle.
d Lock the quick-release catches.
2. Extend the telescopic handle.
a Unlock the handle locks.
Illustration C
b Pull the telescopic handle out completely.
c Lock the handle locks.
Note
The device only functions when the telescopic handle
has been completely pulled out and the handle locks are
locked.
3. Adjust the inclination angle of the handle if neces-
sary.
a Pull out both quick-release catches.
Illustration B
b Turn the quick-release catches.
The quick-release catches are unlocked.
c Choose the inclination angle.
d Lock the quick-release catches.
Attaching the mulch plug
The mulch plug is used when the mown grass is to re-
main on the lawn.
1. Pull up the handle of the mulch plug.
Illustration E
2. Install the mulch plug in the ejection chute.
Illustration F
3. Pull down the handle of the mulch plug.
The mulch plug is locked in the device.
Mount the grass bag
The grass bag is used when the mown grass is to be
collected for disposal.
1. Remove the mulch plug if necessary.
Follow all warning notices and safety instruc-
tions. Read and comprehend all instructions
before using the product.
Watch out for flung or flying objects.
Keep all spectators, especially children and
pets, at least 15 m away from the work area.
Watch out for the sharp blade. The blades
continue rotating after the motor has been
switched off.
Remove the safety key before performing
any maintenance.
Wear suitable eye protection and hearing
protection when performing work.
Do not work on steep slopes.
The guaranteed sound level specified on the
label is 95 dB.
Summary of Contents for LM 530/36 Bp
