Kärcher LMO 36-46 Battery User Manual Download

Page: 15 / 172

English

Battery pack release

Telescopic handle

Grass catcher filling level indicator

Push Assist bracket

Starter button

ON/OFF switch

Motor control cable

Handle lock

Grass catcher

Quick-release catch

Rear wheel

Mulch plug

*Charger

*Rechargeable battery pack

Safety key

* optional

Rechargeable battery pack

The device can be operated with a 36V Kärcher Battery
Power battery pack.

Initial startup

Adjusting the handle

1. Fold over the telescopic handle out until it audibly

latches into place.

Illustration B

2. Unlock the handle locks.

Illustration C

3. Pull the telescopic handle out completely.
4. Lock the handle locks.

Note

The device only functions when the telescopic handle
has been completely pulled out and the handle locks are
locked.

5. Adjust the inclination angle of the handle if neces-

sary.
a Loosen both quick-release catches.

Illustration D

b Choose the inclination angle.
c Lock the quick-release catches.

Attaching the mulch plug

The mulch plug is used when the mown grass is to re-
main on the lawn.
1. Open the ejection chute flap.

Illustration E

2. Insert the mulch plug into the ejection chute.
3. Close the ejection chute flap.

Installing the grass catcher

The grass catcher is used when the mown grass is to be
collected for disposal.
1. Open the ejection chute flap.

Illustration F

2. Remove the mulch plug.
3. Install the grass catcher on the ejection chute. Take

care to ensure that the ejection chute flap locks the
grass catcher in place.

Illustration G

Installing the battery pack

1. Open the battery flap.

Illustration H

2. Push the battery pack into the mounting in the de-

vice until it audibly latches into place.

3. Insert the safety key.
4. Close the battery flap.

Operation

General information on handling the

lawnmower

The run time of the battery depends on several factors:

●

The condition, length and density of the grass

●

The cutting height setting

The maximum surface performance, depending on the
state of the grass, with a 5 Ah battery pack:
approx. 650 m

The results of the mowing process can be optimised as
follows:

●

Cut at a maximum of one third of the grass height.

●

Reduce the speed at which push the device when
mowing tall grass.

Note

Do not mow wet grass. Wet grass sticks to the under-
side of the lawnmower and prevents correct collection of
the grass in the grass catcher or ejection of the grass.

Mowing lawns

몇

WARNING

Lifting or tipping the lawnmower during operation

Incision injuries
The blade of the lawnmower rotates approximately par-
allel to the ground over which it moves. Take care to en-
sure that all four wheels touch the ground when
mowing.

1. Install the grass catcher or mulch plug (see Chapter

Initial startup

2. Set the cutting height using the cutting height adjust-

ment lever.

Illustration I

Choose the cutting height according to the condi-
tion, length and density of the grass (see Chapter

General information on handling the lawnmower

Illustration J

3. Press the start button and the ON/OFF switch.

Illustration K

The device starts.

4. Release the start button and hold the ON/OFF but-

ton pressed.

Empty the grass catcher regularly when using the grass
catcher, otherwise the ejection chute can become
clogged with cut grass (see Chapter

Emptying the

grass catcher

Push Assist function

The Push Assist function activates the device’s self-
driving function.

Note

Only use the Push Assist function on even surfaces. On
gradients or uneven surfaces, you must push the device
as there is a risk that the wheels may start to slip.

The ON/OFF switch is pressed.
1. Press the Push Assist bracket.

Illustration L

The Push Assist function is activated. The device
moves forwards without having to be pushed by the
operator.