Kärcher LTR 15-25 Battery Manual Download

Page: 21 / 265

English

2. Remove the unneeded cutting tool and fit the de-

sired cutting tool (see Chapter Replacing the cutting
tool).

Removing the battery pack

Note
During longer work breaks, remove the battery pack
from the device and secure it against unauthorised use.

1. Pull the battery pack unlocking button in the direc-

tion of the battery pack.

Illustration K

2. Press the battery pack unlocking button to unlock

the battery pack.

3. Remove the battery pack from the device.

Finishing operation

1. Remove the battery pack from the device (see

Chapter Removing the battery pack).

2. Clean the device (see Chapter Cleaning the de-

vice).

Transport

몇

CAUTION

Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device during storage.

1. Remove the battery pack (see Chapter Removing

the battery pack).

2. Secure the device against slipping and tipping over

when transporting in vehicles.

Storage

Clean the device before storing (see Chapter Cleaning
the device).
1. Store the device in a dry, well ventilated location.

Keep away from corrosive substances such as gar-
den chemicals and defrosting salt. Do not store the
device outdoors.

Care and service

몇

CAUTION

Uncontrolled startup
Incision injuries
Remove the battery from the device before all work on
the device.

몇

CAUTION

Risk of injury from sharp blades
Wear safety goggles and protective gloves when work-
ing on the device.

Cleaning the device

1. Remove any remaining cutting residue from the

string guard and the cutting head.

2. Clean the device components with a damp cloth if

required.

3. Clean the battery mount and electric contacts of dirt

and foreign bodies regularly.

Replacing the cutting tool

Replacing the string reel

1. Press the string reel cover unlocking mechanism

and remove the string reel cover.

Illustration L

2. Remove and dispose of the string reel.
3. Feed the end of the string on the new string reel

through the eye.

Illustration M

4. Fit the string reel in the support.
5. Fit the string reel cover in the support. Take care to

ensure that the string reel cover audibly latches into
place.

Illustration N

6. Adjust the string length (see Chapter Initial startup).

Replacing the trimmer blade

1. Press the trimmer blade unlocking mechanism and

remove the trimmer blade.

2. Fit the new trimming blade into the support. Note the

correct position via the marking.

Illustration O

Troubleshooting guide

Malfunctions often have simple causes that you can
remedy yourself using the following overview. When in
doubt, or in the case of malfunctions not mentioned
here, please contact your authorised Customer Service.

As the battery pack ages, even if it is looked after, its ca-
pacity reduces such that the full run time will no longer
be reached when fully charged. This does not indicate a
defect.

Fault

Cause

Rectification

The device does not start
up

Battery pack is not inserted correctly.



Push the battery pack into the mounting
until it latches into place.

Battery pack is empty



Charge the battery pack.

Battery pack is defective.

