Kärcher MT CS 250/36 Operating Instructions Manual Download

Page: 13 / 196

English

shaft connection of the rod and the cutting tool are se-
curely fastened.

ATTENTION

●

Only store the device indoors.

Safe transport and storage

몇

WARNING

●

Switch the device off, allow it to

cool down and remove the battery pack before storage
or transportation.

●

Cover the cutting tool with the bar

scrabbard before storing or transporting the device.

몇

CAUTION

●

Risk of injury and damage to the

device. Secure the device against movement or falling
down during transport.

ATTENTION

●

Remove all foreign bodies from the

device before storage or transportation.

●

Store the de-

vice in a dry, well ventilated location out of the reach of
children. Keep the device away from corrosive sub-
stances such as garden chemicals.

●

Do not store the

device outdoors.

●

Make sure the chain is lightly oiled

when storing the device for more than one month. The
manufacturer recommends using a spray for rust pro-
tection and oiling. Ask your Customer Service depart-
ment to recommend a suitable spray.

Safe servicing and care

Note

●

Service and maintenance work may only be

performed by suitably qualified and specially trained
personnel. We recommend sending the product to an
authorised service centre for repair.

●

You may only

perform the adjustments and repairs described in these
operating instructions. Contact your authorised Cus-
tomer Service department for other repairs.

몇

WARNING

●

Risk of injury. The saw chain is

extremely sharp. Wear suitable protective gloves when
performing chain maintenance and when cleaning, se-
curing or removing the bar scrabbard.

●

Follow the in-

structions for chain tensioning, chain tension
adjustment and chain lubrication.

●

Severe injuries due

to kickback if a damaged chain is not replaced or re-
paired.

●

Turn off the motor and remove the battery

pack before cleaning or servicing the device.

●

Ensure

that the device is in a safe condition by regularly check-
ing that all bolts, nuts and screws are screwed tight.

●

Risk of injury due to long, uninterrupted use of the de-

vice. Take regular breaks while working with the device.

몇

CAUTION

●

Only use accessories and spare

parts and attachments that are approved by the manu-
facturer. Only original spare parts, original accessories
and original attachments ensure fault-free and safe op-
eration of the device.

ATTENTION

●

Clean the product with a soft, dry

cloth each time after use.

Residual risks

몇

WARNING

●

Certain residual risks remain present, even when the

device is operated in the prescribed manner. The fol-
lowing dangers can be present when using the de-
vice:

●

Vibration can cause injuries. Use the correct tools
for the job, use the handles provided and restrict the
working time and hazard exposure time.

●

Noise can cause hearing injuries. Wear hearing pro-
tection and limit the duration of exposure.

●

Incision injuries on contact with exposed saw teeth
of the saw chain.

●

Incision injuries due to unforeseen, abrupt move-
ments or kickback of the guide rail.

●

Incision injuries / risk of injection by parts flying away
from the saw chain.

●

Injuries caused by hurled objects (wood shavings,
splinters).

●

Injuries due to falling objects. Always wear a suita-
ble protective helmet when working overhead.

●

Inhalation of dust and particles.

●

Skin contact with the lubricant / oil.

Risk reduction

몇

CAUTION

●

Using the device for longer periods can cause poor

circulation in the hands due to vibrations. A general
period of use cannot be set, because this depends on
several influencing factors:

●

Personal tendency to suffer from poor circulation
(frequently cold fingers, tingling sensation in the fin-
gers)

●

Low ambient temperature. Wear warm gloves to
protect your hands.

●

Holding the device too tightly hindering blood circu-
lation.

●

Continuous operation is more harmful than opera-
tion interrupted by work breaks.

You should see a doctor if using the device regularly
and for lengthy periods of time, and in the event of re-
peated occurrences of symptoms such as tingling in
the fingers or cold fingers.

Intended use



DANGER

Improper use

Danger of death from incision injuries
Only use the device for its proper use.

●

The pole saw accessory is suitable for commercial
use.

●

The accessory is intended for use with the MT 36 Bp
Multi-Tool.

●

The device is intended for outdoor use only.

●

For safety reasons, always hold the device firmly
with both hands.

●

The device is intended for pruning and trimming
small branches and twigs high on a tree. The user
stands securely on the ground.

Any other use, e.g. when climbing, for pruning low
branches or for cutting material at ground level is pro-
hibited. The user shall be liable for hazards arising as a
result of improper use.

Environmental protection

The packing materials can be recycled. Please
dispose of packaging in accordance with the en-
vironmental regulations.
Electrical and electronic appliances contain valu-
able, recyclable materials and often components
such as batteries, rechargeable batteries or oil,
which - if handled or disposed of incorrectly - can

pose a potential threat to human health and the environ-
ment. However, these components are required for the
correct operation of the appliance. Appliances marked
by this symbol are not allowed to be disposed of togeth-
er with the household rubbish.

Notes on the content materials (REACH)

Current information on content materials can be found
at:

www.kaercher.com/REACH