– 1
Please read and comply with these origi-
nal instructions prior to the initial opera-
tion of your appliance and store them for
later use or subsequent owners.
–
Before first start-up it is definitely necessary to read
the safety indications Nr. 5.956-249.0!
–
The non-compliance of the operating and safety in-
structions may lead to damages of the appliance
and to dangers for the operator and other persons.
–
In case of transport damage inform vendor immedi-
ately.
–
When unpacking the product, make sure that no
accessories are missing and that none of the pack-
age contents have been damaged.
Electrical and electronic devices often contain compo-
nents which could potentially pose a danger to human
health and the environment if handled or disposed of in-
correctly. However, these components are necessary
for the proper operation of the device. Devices marked
with this symbol must not be disposed of with regular
household rubbish.
Notes about the ingredients (REACH)
You will find current information about the ingredients at:
www.kaercher.com/REACH
몇
WARNING
The appliance is not suitable for vacuuming dust which
endangers health.
–
The machine is meant for dry and wet cleaning of
floors and walls.
–
This appliance is suited for the commercial use,
e.g. at construction sites, in industrial systems, in
workshops and rental companies.
1
Nameplate
2
Power cord
3
Holder for suction pipes
4
Holder for crevice nozzle
5
Suction hose
6
Suction head lock
7
Steering roller
8
Dirt receptacle
9
Suction support
10 Floor nozzle (Adv only)
11 Floor nozzle (not Adv)
12 Suction tube
13 Main switch
14 Suction head
15 Carrying handle
16 Cable hook
17 Bender
18 Cartridge filter
19 Fastening nut
20 Float
ATTENTION
Risk of damage! For dry vacuuming, the cartridge filter
must always be installed.
–
To vacuum fine dust, you can also use an addition-
al paper filter bag.
Illustration
Illustration
Release and remove the suction head.
Insert the paper filter bag.
Insert and lock the suction head.
Illustration
Remove the brush strips.
Install the rubber lips.
Note:
The structured side of the rubber lips must point
outwards.
–
To suck wet dirt, first remove the paper filter bag.
Release and remove the suction head.
Turn the suction basket by 180° and keep it aside.
Loosen the mounting nuts
Remove the cartridge filter.
Illustration
Insert the fastening nut and tighten it.
Install the additional filter.
Insert and lock the suction head.
Illustration
The suction hose is equipped with a clip system. All C-
35/C-DN-35 accessories can be connected.
Contents
Environmental protection
EN
1
Proper use
EN
1
Device elements
EN
1
Start up
EN
1
Operation
EN
2
Transport
EN
2
Storage
EN
2
Care and maintenance
EN
2
Troubleshooting
EN
2
Warranty
EN
2
Accessories and Spare Parts
EN
2
EU Declaration of Conformity
EN
3
Declaration of Conformity (UK)
EN
3
Technical specifications
EN
4
Environmental protection
The packaging material can be recycled.
Please do not throw the packaging mate-
rial into household waste; please send it
for recycling.
Old appliances contain valuable materi-
als that can be recycled; these should be
sent for recycling. Batteries, oil, and sim-
ilar substances must not enter the envi-
ronment. Please dispose of your old ap-
pliances using appropriate collection sys-
tems.
Proper use
Device elements
Start up
Dry vacuum cleaning
Inserting the paper filter bag
Wet vacuum cleaning
Inserting the rubber lips
Remove the paper filter bag
Installing an additional filter
Clip connection
9
EN
Summary of Contents for NT 27/1
