New Unit Information 05.2007
Troubleshooting
Puzzi 8/1 C
Page 26 / 29
Troubleshooting
Faults
Solution
No water discharge at the
nozzle
– Check/top up water level in the fresh-water tank.
– Check connections at spray/suction hose for correct
fit/wear.
– Check spray nozzle for blockage - clean/replace.
– Check water filter in fresh-water tank for blockage - clean/
replace.
– Check/replace water pump (M2).
One-sided spray jet
– Check spray nozzle for blockage - clean/replace.
Insufficient suction perfor-
mance
– Check correct fit of the wastewater tank cover/correctly
position.
– Check/clean/replace seal at wastewater tank cover.
– Check/clean fluff strainer.
– Check spray / suction hose for blockage - clean.
– Check/replace suction motor (M1).
Water pump is loud
– Check/top up water level in the fresh-water tank.
