8
English
5.906-507.0 Rev. 00 (08/10)
1 Toothed wheel, brush roller
2 Fastening screw, brush roller
3 Gear belt
4 Toothed drive wheel
Î
Remove the fastening screw from the brush roller.
1 Toothed wheel, brush roller
2 Gear belt
3 Toothed drive wheel
Î
Remove the toothed belts from the toothed
wheels.
Î
Pull the brush roller out of the brush head.
Î
Install the new brush roller in reverse order.
Î
Insert the brush roller into the guide bore of the
brush roller cover plate.
1 Elongated hole
2 Toothed wheel, brush roller
Î
Watch for the correct seating of the threaded
sleeve in the elongated hole when installing the
brush roller.
Î
Screw in the fastening screw of the brush roller.
