English
9.808-136.0 Rev. 00 (09/18)
38
The back side of the pump has a few spots that oil can leak
from. The crankcase cover, sight glass and the oil drain plug.
1. Inspect around the sight glass. If oil is leaking from the
sight glass then replace the sight glass gasket and/or the
sight glass.
2. Inspect around the oil drain plug. If oil is leaking from the
oil drain plug then replace the oil drain plug gasket and/or
the oil drain plug.
3. Inspect around the crankcase cover. If oil is leaking from
the crankcase cover then replace the crankcase cover gas-
ket and/or the crankcase cover.
4.
Test machine for a short period of me to get the seal and
oil warm. Let machine sit to confirm there is not an oil
leak.
6.5.16
Inspec$ng back side of pump for oil leak
2
3
4
4
4
4
6.5.17 Inspec$ng engine side of pump for oil leak
1. Remove the pump from the engine.
2. Inspect the engine sha? to make sure the engine crank-
sha? seal is not the problem.
3. If oil is leaking from pump cranksha?, drain the oil from
the pump. See the first part of sec on 6.4.11.
4.
Remove and replace the cranksha? oil seal.
5.
Fill the pump with new oil. See the second part of sec on
6.4.
6.
Confirm there is no oil leak
7. Put the pump back on the engine.
8. Test machine for a short period of me to get the seal and
oil warm. Let machine sit to confirm there is no oil leak.
3
