English
9.808-136.0 Rev. 00 (09/18)
39
1.
Inspect to see if oil is leaking from cranksha? cap side of
pump.
2.
If it is, drain the oil from the pump. See the first part of
sec on 6.4.11.
3. Remove and replace the cranksha? cap seal and/or cap.
4. Fill the pump with new oil. See the second part of sec on
6.4.11.
5. Confirm there is no oil leak
6. Test machine for a short period of me to get the seal and
oil warm. Let machine sit to confirm there is no oil leak.
6.5.18
Inspec$ng crankshaP cap side of pump for oil leak
1
1. Inspect to see if oil is leaking from under the pump mani-
fold.
2. If it is, remove the pump from the engine then remove the
pump manifold from the crankcase.
3. Inspect where the piston guides come out of the crank-
case.
4. If oil is leaking out of the piston guide oil seals, drain the
oil from the pump. See the first part of sec on 6.4.11.
5. Remove and replace the piston guide oil seals.
6. Fill the pump with new oil. See the second part of sec on
6.4.11.
7. Confirm there is no oil leak
8. Test machine for a short period of me to get the seal and
oil warm. Let machine sit to confirm there is no oil leak.
6.5.19 Inspec$ng piston guide oil seals for oil leak
