English
9.808-136.0 Rev. 00 (09/18)
40
1.
Test machine with pressure. Release the trigger gun. In-
spect for leaking out of the end of the wand.
2. If there is leaking out of the end of the wand then rebuild
or replace trigger gun.
3. Test for leak again to confirm problem is corrected.
6.5.20
Inspec$ng trigger gun for leak
6.5.21 Inspec$ng spray bar trigger for leak
1. Test machine with pressure.
Release the spray bar trigger gun.
Inspect for leaking out of the end
of the spray bar.
2. If there is leaking out of the
end of the spray bar then rebuild
or replace spray bar trigger #8.
3. Test for leak again to confirm
problem is corrected.
8
7
Technical documenta$on
7.1
Technical specifica$ons SCW 2.4/25 G
GPM
2.5
PSI
2500
Drive
Direct
Engine
Honda GX 200
Engine CC
200
Pump
Tri-Plex LP3035G
Cleaning Width
21 Inches
